Corporate Production Management Introduction

Production standard:
The company combines domestic and international the smart card product standards such as ISO 7816, ISO 14443-TAPE-A, TAPE-B, ISO 15693 and other standards, specially formulated Our common cards, contactless IC cards, contactless IC card business standards and validated by national technical supervision departments and for the record. The standard not only has a certain practical nature, forward-looking, fully reflects our company's product quality management protection.
Production structure:
In production structure on a fine division of labor and cooperation, specially set up the quality of the direct leadership of General Manager of the Department of the Secretary is responsible for all product quality control, product process critical control point to control the management and product testing records. Using advanced production management department of "Kanban" management, protection of the production process seamless. On the production site using the "5S" management model to achieve the work site clean and good staff morale.
Production process:
The company strictly according to ISO9001-2000 version of the requirements of the functional status of the rights, responsibilities and interests to design, on the staff of the production process planning, and develop the company's standard of program files, boot and binding behavior of the staff until it purpose of behavior. Bound to consciously change.
Production of documents and logistics:
The company set up a document management center, responsible for all documents, including the production of the document generation, transfer, registration, inspection and other functions, so that customer information with the maximum safety and security. At the same time the company has a dedicated logistics department responsible for the feed material, internal logistics, the management of the material so that material can be traced back to complete the premise that most of the flow, especially in material waste, the company made use of CCTV video, and retained three months, double the control ledger for future reference in case of destruction, to the maximum extent to ensure the interests of customers.
Security measures introduced
Organizations in the international Master's rigorous security and risk management system to run. In hardware, the company is equipped with a full range of CCTV surveillance system to conduct comprehensive, all-weather surveillance no blind spots, and high security areas, such as fax, data processing areas, high security zones to keep materials logistics for three months The video and archiving; the same time the company is equipped with infrared surveillance alarm system, alarm system, the company felt in terms of security in the industry for establishing a good reputation.
In addition, the company's security management software is also unique, from out of the factory management to the internal flow, logistics management, particularly in data security management point to point transmission of management are of great innovation, this, also won MasterCard International experts praise.
Quality testing and after-sales service system description:
General Manager of the company specifically set up the quality of the direct leadership of the Ministry Division-wide quality management, the product of the process critical control point to the finished product testing management and control of the record. Key points in the process control, our company processes specific difficulties such as synthetic, red card, composite card packaging, personalized card, etc. according to GB2828 sample, then compared the original data, and then to guide production. In addition, product quality control, Our quality control department of the general manager full authority to carry out the work, the implementation of quality "NO." Keep products out of the disputed flaw mustache company. Feedback from the customer point of view, the whole works well.
Company to a breakthrough in technology, in December 2001 the company was set up laboratory acquired has come from Japan and Germany advanced detection equipment, hired a senior industry technologists, by difficulties of the company's technology capture, to the normal quality control provides a scientific basis. Particularly in the IC card, RF card and composite cards made, it has already accumulated rich experience and empirical evidence.
In packaging, transport management has taken special security precautions, in order to make the product safe transport to the customer hands, the company tested the product, after all, amount to double its machine-readable verification and timely information to stay packed and file, except transport customers with special requirements, are using special boxes door to door transport to ensure cargo security.
Material suppliers and production control:
① I chose the material suppliers (including kaki materials, chip module, etc.), all through the ISO 9000 quality system certification of informal enterprises (see material suppliers directory).
② For suppliers glue, ink and other auxiliary materials are strict quality standards, our company strictly monitor its products to ensure good quality.
③ In order to ensure the quality of raw materials, our company material suppliers once a year review of methods, such as: on-site assessment / experts.
④ card company for the production of all materials, materials are environmentally friendly material, without any harm to human health.
⑤ company materials used are from the manufacturer or manufacturer's designated agents in the country to buy.
 Process Control:
① company has a complete fabrication and personalization of all of the production process, from raw materials to finished entering all the production process out of the library are complete on their own (in its own plant in the production, use their own equipment, from its own production staff management and production).
② will not strictly be part of the production process, in any form to any outsourcing.
③ in each stage of the production process has the quality of the card sent by the Department of strict detailed statistics, verification and records.
④ every production process is equipped with specialized instrumentation to conduct sample tests on the quality of the card.
⑤ quality control procedures: (see the company's quality department specific description)
⑦ film production company independent film, the program is: Design - Customer confirmation - orders - publishing - typesetting - punching - make-up - burn out - the machine print.
Quality Control:
★ Quality Department as an independent department in charge directly by the General Manager, Quality Department's main responsibilities are:
1, ISO9000 standards and quality system implementation, implementation, supervision, assessment.
2, the development, release, perfect quality management system and implement regulations, inspections and checks.
3, involved in the supplier evaluation and selection into the factory for the production of materials for quality inspection.
4, the production process, quality control and management.
5, the quality of incident handling and corrective and preventive measures for the development, implementation, evaluation.
6, receiving customer complaints about quality.
7, the quality of internal audit organization.
8, product quality statistical information collection, management and analysis application.
9, the quality of the training organization.
★ accordance with the job of three different quality management team consists of:
1, quality control staff: primarily responsible for the maintenance of quality system and quality of statistical work
2, Testing Center: responsible for purchasing testing, process quality control testing, performance testing, product testing and factory inspection apparatus and management
3, inspection staff: responsible for all production processes and the sampling inspection

Service:
① company prior to delivery to the buyer at the inspection program, and provide the appropriate test methods, confirmed by the buyer;
② product quality, specifications and performance strictly follow ISO standards, product failure rate of less than three thousandths;
③ My company has a product update and upgrade the capacity and strong after-sales technical support system;
④ our company to ensure safe use of confidential or other means of transportation, the card transport to the place of delivery specified by the buyer and the consignee to ensure that the card on time, safe delivery;
⑤ I guarantee that when the buyer firm are in urgent need of any time outside the normal procedures set card card spot production, an emergency supply for the buyer, the buyer directly to the designated location.
⑥ my warranty company to provide 24-hour online service, provide the appropriate contact to address quality issues of any costs incurred by my company.